AP Racing - Website Updates
The SCIENCE of FRICTION
HOME | CONTACT | SITE MAP

Website Updates

February 19th 2007
New 6 piston calipers CP6087, CP6088 & CP6096 added to GT range, and new
6 piston calipers CP5270-2/3/4/5S7L & CP5260-8/9/10/11S7L added to Pro 5000+ range.

February 12th 2007
3/8" UNF pushrod incorrectly specified for CP5520-13 balance bar assembly, correct pushrod should be 5/16" UNF.

January 19th 2007
Dry Bleed System added to Caliper section. New Flywheel Kits and Clutch and Flywheel Kits added to Performance Road Car Clutch Kits.

October 19th 2006
Carbon Clutch pressure plate fitment guides added to majority of carbon clutches.

September 4th 2006
MG ZR 160 4 piston brake kit CP6634-1000R2.CG8 added to Formula Big Brake Kits. Kit uses Ø330 x 26mm disc.

August 31st 2006
New Formula Big Brake Kits added to range,
BMW E60 535D 6 piston brake kit CP5555-1043R2.T2 with red calipers, uses Ø362 x 36mm disc.
BMW E60 M5 6 piston brake kit CP5555T1045.G8 with black calipers & CP5555T1045R2.G8 with red calipers, uses Ø378 x 36mm strap drive disc assembly.
Nissan 350Z front 6 piston kit CP7040-1011.CG12 and rear 4 piston kit CP7633-1000.CG12 kits.
Mitsubishi Evo 3 4 piston kit CP5200-1066.
Mazda RX7 6 piston kit CP5570-1016R2.G8.
VW Golf Mk5 Gti & Tdi 6 piston kits CP5570-1015.G8 & CP5570-1015R2.G8.

August 15th 2006
New High Efficiency Floor Mount Push Type Pedal Box CP5509-1, and High Efficiency Multi Ratio Underslung Push Type CP5508-1 added. These new pedal boxes use the CP5854/CP5855 master cylinders and trunnion balance bar system.

June 23rd 2006
Ø25.4mm (1.00") bore size cylinder added to CP6465 pull type master cylinder range.

June 7th 2006
CP4411 master cylinder deleted from section, this cylinder is now replaced by CP5855 type.

June 6th 2006
Additional diagrams added to balance bar details showing the correct balance bar setting at rest and under maximum load. Details here.

June 2nd 2006
Brake disc section updated. Brake disc castings for CP3124 and CP4530 discs have been replaced by new 48 vane castings CP4348 (CP3124) and CP4448 (CP4530) part number example:- CP4348-528/529G4 was CP3124-528/529G4.

May 26th 2006
Honda S2000 brake upgrade kit added to road car section. Details here.

May 23rd 2006
Formula Student/SAE information updated with additional master cylinder details, and note regarding 2D drawings.

April 21st 2006
Carbon Brake Disc section added. Section gives mounting information and user guide.

April 7th 2006
New Stock Car Product section added. Some information for the caliper, rotor and pad sections still to be fully completed.
New Formula Student/SAE information section added.
Caliper section updated, many installation drawings added.

April 6th 2006
New brake upgrade kits added include Ford Mondeo ST220 4 piston brake kit CP5200-1065.SD with black calipers & CP5200-1056R2.SD with red calipers, uses Ø330 x 26mm disc.
Saab 9-5 6 piston brake kit CP5575-1007.G8 calipers finished in black, CP5575-1007R2.G8 calipers finished in red, uses Ø355 x 32mm disc and standard 18" wheel.
Rear brake kits
Subaru Impreza 2001 on inc 06 (replaces Brembo 2 pot) compliments AP Racing front kits CP7040 type. CP7625-1000R2:CG12, 4-piston lug mount caliper finished in Red, Ø335 x 24mm integral park drum disc, 12 curved grooves.
Subaru Impreza 1998 to 2001 (replaces Subaru 2 pot) compliments AP Racing front kits CP5200 & CP5570 type. CP7615-1002, 4-piston bracket mount caliper finished in Black, Ø310 x 24mm integral park drum disc, Drilled faces. Also available with red calipers and grooved discs.
The following are 4-piston 2 piece, front brake upgrades.
Vauxhall VX220 CP7621-1001:CG8 (Standard 16” wheel).
Smart Roadster CP7626-1000R2:SD (Brabus OE wheel).
Mazda MX5 CP7611-1001R2:SD (16” aftermarket wheel).
Toyota MRS (Mk3) CP7626-1003R2:CG8 (16” aftermarket wheels).

November 25th 2005
Motorcycle section has installation drawings added to Caliper and Master Cylinder sections.

November 7th 2005
Carbon clutch section updated. Installation drawings added.

October 14th 2005
Sintered clutch section updated, new CP4429 sintered paddle driven plate added for high torque single plate applications.

July 12th 2005
New high efficiency push type master cylinder CP5855 added to range, and CP5854 master cylinder changed to UNF threads. Contact details updated for Russian Authorised Dealer BM Motorsport.

June 30th 2005
Source Product link to Official Distributors and Authorised Dealers added throughout site.

Enter a part number, manufacturer or model below.


Distributors supply and sell the full range of AP Racing products.

Dealers generally specialise in specific markets or products.


New 6 piston GT caliper added
Caliper family CP6087-2/3/4/5S
Looking for Historic Calipers?

AP Racing has a range of historic calipers

New World Touring Car Caliper

New World Touring Car Caliper