Audi R8 - Rear - 2007 on - CP8080Z50 (RH) / CP8080Z51 (LH)

Audi R8 - Rear - 2007 on - CP8080Z50 (RH) / CP8080Z51 (LH)

CP8080Z50 & Z51 use the latest "Float in the bell" Mounting system, this allows axial and radial float and helps eliminates drive bobbin rattle.

IMPORTANT NOTES:
- Directly replaces standard Ø355 x 32mm, 2 Piece disc with OEM calipers. - Before fitting new disc and bell assembly remove the OEM Brake caliper noise block by undoing the two Allen bolts.

Ø365 x 34mm Disc & Mounting Bobbin Kit Numbers:
- RH = CP8080Z50SD / - LH = CP8080Z51SD - Drilled disc face type.
- RH = CP8080Z50GA / - LH = CP8080Z51GA - 'J' Hook disc face type.

Ordering Note:
When ordering discs for first purchase mounting bells are also required. Because AP Racing discs use 12 mounting holes while OEM disc uses 10.

AP Racing Mounting Bell Part Number: - RH / LH = CP8080Z500
(2 off required).

(kits do not include brake pads)

  • Model Type & Year 2007 on
    Disc Diameter & Thickness (mm) Ø355 x 32mm
    Mounting bell fixing kit P/No. Contact AP Racing for details
    Disc Face Type Available SD - Drilled
    Weight - Kg 8.2
  • Sorry, there are no downloads.

  • Additional Information

Associated Products

Contact us today if you need any help finding the right product for you +44 (0) 24 7663 9595