Conventional Mount - High Efficiency Type - CP5520-25

Conventional Mount - High Efficiency Type - CP5520-25

Trunnion Balance Bar
CP5520-25
is a new concept in balance bars where the central pivot is a trunnion rather than a spherical bearing. This has the advantage of preventing balance bar movement in the vertical plane thus removing the largest cause of unwanted balance variation. The centre trunnion and clevises employ needle roller bearings to reduce friction and hysteresis to a minimum, improving modulation. CP5520-25 can be attached to the pedal or to the fixed end of the pedal box. this specific version is designed to fit CP7855 type master cylinder.

This balance bar is available with or without clevis's, part numbers:
- CP5520-25L without clevis's.
- CP5520-25LC with clevis's.

IMPORTANT SUPERCESSION NOTE:
CP5520-25L REPLACES CP5520-2 AND CP5520-25LC REPLACES CP5520-13, BOTH CP5520-2 AND -13 ARE NO OBSOLETE AND NO LONGER AVAILABLE TO ORDER. FOR INFORMATION PLEASE REFER TO TECHNICAL DEPARTMENT.
 
The installation drawings include details of how to set up the balance bar, additional diagrams show the correct balance bar setting at rest and under maximum load, see downloads below.

Associated Products

Contact us today if you need any help finding the right product for you +44 (0) 24 7663 9595