CP7923 Endurance Specification Heavy Duty

CP7923 Endurance Specification Heavy Duty

TYPICAL APPLICATION:
- GT.
- Endurance racing


FEATURES:
- 10 Bolt, One piece cover and lugs.
- Pull type configuration:

 - increased efficiency in terms of clamp and release loads.
- High ration option only.
- Heavy duty carbon material.
- Extra carbon plate, acts as heat shield to heavy duty diaphragm spring

- Lighter duty option available, CP7223 Family

AVAILABLE OPTIONS:
- Two Diaphragm Spring Variants:
 - C (CRV).
 - G (GRY).
- Cover & Pressure Plate Material Variants:
- (02) Aluminium Cover & Stainless Steel P/Plates.
- (03) Steel Cover & Stainless Steel P/Plates.
- Flywheel Options:
- FN = Standard Flat.
- FC = Flat with CFS (Cushion Flywheel System).
- SC = Stepped with CFS (Cushion Flywheel System).

SAMPLE PART NUMBER:
- CP7923-GH03-FN.
- Other part numbers available please refer to Installation drawing below or contact AP Racing Technical Section.
  • TECHNICAL SPECIFICATIONS FOR - CP7923-GH03-FN
    Torque Capacity - Nm (lbs/ft) 1333 (982)
    Clutch "Wear In" - mm 1.50
    Total Allowable Carbon
    Stack Wear - mm
    6.0
    RELEASE LOADS
    Max Peak Worn 565daN
    At Travel 370daN
    SET UP HEIGHTS - in mm
    New 45.35
    Worn 38.10
    Weight Range - Kg 2.75
    Complete Assy Inertia 0.102Kgm²
    Driven Plate & Hub Inertia 0.001348Kgm²
    MAIN PRESSURE PLATES
    Download pressure plate guide for Part Nos
    Ratio Options HiR (High)
    Material Options Stainless Steel
    Pressure Plate kits - .5mm to 4.5mm (0.5mm Steps) = CP6504-7SS
    - 0.25mm to 4.25mm (0.5mm Steps) = CP6504-8SS
    HUB OPTIONS
    Material Steel
    Sample Spline Size & Part No 1.16"x26 = CP7803-108S
    SUITABLE SLAVE CYLINDERS See Slave Cylinders
    - CP6245-7 or -8
  • Click on the link to download the relevant drawing.

Associated Products

Contact us today if you need any help finding the right product for you +44 (0) 24 7663 9595