Sintered Driven Plate Chart
The table below provides information on the most popular splines available for the sintered driven plates detailed in this section. AP Racing has other splines available, please Contact Us for further information.
| Sintered Driven Plates | ||||||||||||||||||
| Spline | 115mm | 140mm | 184mm | |||||||||||||||
| No. of Teeth |
Out- side Dia- meter |
CP 5004 Back to Back |
CP 6074 ext'd Hub |
CP 3407 ext'd Hub |
CP 3414 Back to Back |
CP 4122 Gear Drive |
CP 4123 Gear Drive |
CP 3683 Back to Back |
CP 6014 ext'd Hub |
CP 4073 Gear Drive |
CP 4074 Gear Drive |
CP 4429 Back to Back |
CP 2012 Back to Back |
CP 2012 Cen -tre type |
CP 2567 f/ wheel side |
CP 2567 p/ plate side |
CP 2822 Gear Drive |
CP 3822 Gear Drive |
| 10 | .875" | -37 FM3 |
-30 FM3 |
-208 FM3 |
||||||||||||||
| 10 | 1.0" | -164 FM3 |
-35 FM3 |
-36 FM3 |
||||||||||||||
| 10 | 1.062" | -198 FM3 |
-181 FM3 |
|||||||||||||||
| 10 | 1.125" | -4 FM3 |
-20 FM3 |
-7 FM3 |
-7 FM3 |
-5 FM3 |
-10 FM3 |
-14 FM3 |
-6 FM4 |
-117 FM3 |
-169 FM3 |
-15 FM3 |
-16 FM3 |
-3 FM3 |
-17 FM3 |
|||
| 10 | 1.25" | -37 FM3 |
-174 FM3 |
-172 FM3 |
-27 FM3 |
|||||||||||||
| 10 | 29.0 | -7 FM3 |
-8 FM3 |
-25 FM3 |
-6 FM3 |
-5 FM3 |
-13 FM3 |
-7 FM3 |
-12 FM3 |
-5 FM4 |
-199 FM3 |
-244 FM3 |
-29 FM3 |
-30 FM3 |
-29 FM3 |
|||
| 14 | 1.0" | -44 FM3 |
-180 FM3 |
|||||||||||||||
| 17 | 20.0 | -43 FM3 |
-180 FM3 |
|||||||||||||||
| 18 | 21.1 | -53 FM3 |
-36 FM3 |
-12 FM3 |
-9 FM3 |
-11 FM4 |
-205 FM3 |
|||||||||||
| 20 | 17.3 | -203 FM3 |
||||||||||||||||
| 20 | .875" | -6 FM4 |
-26 FM3 |
-18 FM3 |
-4 FM3 |
-4 FM3 |
-4 FM3 |
-6 FM3 |
-10 FM3 |
-3 FM4 |
-166 FM3 |
-179 FM3 |
-7 FM3 |
-8 FM3 |
-20 FM3 |
-11 FM3 |
||
| 21 | .71" | -170 FM3 |
||||||||||||||||
| 21 | 18.3 | -204 FM3 |
||||||||||||||||
| 21 | .92" | -45 FM3 |
-12 FM4 |
-188 FM3 |
||||||||||||||
| 21 | 24.0 | -21 FM3 |
-11 FM3 |
-6 FM3 |
-161 FM3 |
-33 FM3 |
-34 FM3 |
-36 FM3 |
||||||||||
| 21 | 29.0 | -27 FM3 |
-10 FM3 |
-191 FM3 |
-240 FM3 |
|||||||||||||
| 22 | 1.0" | -40 FM3 |
-10 FM4 |
-192 FM3 |
-220 FM3 |
|||||||||||||
| 23 | 1.0" | -5 FM4 |
-22 & -23 FM4 |
-36 FM3 |
-10 FM3 |
-2 FM3 |
-2 FM3 |
-3 FM3 |
-4 FM3 |
-2 FM3 |
-4 FM4 |
-165 FM3 |
-178 FM3 |
-23 FM3 |
-24 FM3 |
-23 FM3 |
-10 FM3 |
|
| 24 | 0.8" | -167 FM3 |
||||||||||||||||
| 24 | 1.0" | -32 FM3 |
-3 FM3 |
-3 FM3 |
-5 FM3 |
-9 FM3 |
-8 FM4 |
-154 FM3 |
-210 FM3 |
-32 FM3 |
||||||||
| 26 | 22.0 | -56 FM3 |
-50 FM3 |
-9 FM4 |
-216 FM3 |
|||||||||||||
| 26 | 1.16" | -8 FM4 |
-18 & -19 FM4 |
-40 FM3 |
-19 FM3 |
-5 FM3 |
-6 FM3 |
-12 FM3 |
-9 & -10 FM3 |
-3 FM3 |
-11 FM3 |
-171 FM3 |
-173 FM3 |
-11 FM3 |
-12 FM3 |
-41 FM3 |
||
| Gear Drive Slider |
CP 4124 -9FM3 |
-6 FM3 |
-31 FM3 |
|||||||||||||||
All sintered driven plates are 2.63mm (0.103") nominal new thickness.
Note - CP6074-19FM4, -23FM4 & CP6014-10FM3 has extended length spline, and CP6074-18FM4, -22FM4 & CP6014-9FM3 has offset spline to clear -19FM4 and -10FM3 plates.
Example Part Number:- CP6074-18FM4 offset hub 2.63mm thick, 1.16" x 26 teeth spline.