CP7313 - Heavy Duty of CP7213 - 12 Mounting Bolts

CP7313 - Heavy Duty of CP7213 - 12 Mounting Bolts

TYPICAL APPLICATION:
- Rally Cross

FEATURES:
- 12 Bolt, One piece Aluminium or Steel cover and lugs available.
- Push type.
- Steel pressure plates.
- Heavy duty carbon material only.
- Flat flywheel option only.

AVAILABLE OPTIONS:
- One Diaphragm Spring Variants:
 - C (CRV).
- One Ratio Variants:
- VH = ( VHR) Very High.
- Two Cover & Pressure Plate Material Variants:
- (01) Aluminium Cover & Steel P/Plates.

- (13) Steel Cover & Steel P/Plates.

SAMPLE PART NUMBER:
- CP7313-CV01-FN.
- Other part numbers available please refer to Installation drawing below or contact AP Racing Technical Section.

  • Torque Capacity Range - Nm (lbs/ft) 1167 (860)
    Clutch "Wear In" Range - mm 1.25
    Total Allowable Carbon
    Stack Wear - mm
    6.00
    RELEASE LOADS
    Max Peak Worn - daN 445
    At Travel - daN 375
    SET-UP HEIGHTS - mm
    New - mm 43.12 / 40.31
    Worn - mm 47.80
    Weight Range - Kg - Aluminium Cover = 3.57
    - Steel Cover = 5.28
    Complete assembly Inertia - Kgm² - Aluminium Cover = 0.241
    - Steel Cover = 0.396
    Driven Plate & Hub Interia - Kgm² 0.00472
    MAIN PRESSURE PLATES:
    Download Fitment Guide for
    Part No"s
    Ratio Options VHR - Very High
    Material Options Steel
    Pressure Plate Kits - 0.5mm to 5.0mm (0.5mm Steps) = CP7313-8
    - .25mm to 4.75mm (0.5mm Steps) = CP7313-9
    HUBS:
    Material Steel
    Sample Spline Size & Part No 1.00" x 23T & CP4203-102S
    SUITABLE RELEASE BEARINGS:
    Inner Race Rotates CP3457-6
    Outer Race Rotates CP3457-2 or CP3457-10
  • Click on the link to download the relevant drawing.

Associated Products

Contact us today if you need any help finding the right product for you +44 (0) 24 7663 9595