Triple (3) Plate - CP7383 Family

Triple (3) Plate - CP7383 Family

Typical Applications:
- Race / - Rally / - X-Raid / - Hillclimb / - Historic


Features:
- Push Type.
- Stepped Flywheel Fixing.
Inner diameter location.
- 6 bolt, one piece cover and lugs.
machined from aluminium alloy. Allows dust and debris to escape.
- Black hard anodised.
- Stainless steel wear plates fitted.
- Low wear rate.
- Individually tested
match machined, balanced and clutch load recorded.
- Mounting studs available, CP4702.
- Organic Driven Plate option available CP5386 Family - NOTE: IF USED DO NOT EXCEED 7000 RPM
 

Part Numbers:

- CP7383-CE80-SF.
- CP7383-NE80-SF.
- CP7383-OE80-SF.

- CP7383-TE80-SF.

  • Torque Capacity Nm (lbs/ft) - TE - 1508Nm / 1111(lb.ft)
    - CE - 1257Nm / 926(lb.ft)
    - OE - 789Nm / 581(lb.ft)
    - NE - 485Nm / 358(lb.ft)
    Release Load - Max Peak New - daN - TE - 4000N
    - CE - 3500N
    - OE - 2400N
    - NE - 1600N
    Release Load - Max Peak Worn - daN - TE - 5100N
    - CE - 4400N
    - OE - 3300N
    - NE - 2200N
    Clutch "Wear In" 0.75mm
    Set-up Height - New - TE = 48.06/44.71mm
    - CE = 47.81/44.46mm
    - OE = 48.60/45.22mm
    - NE = 47.78/44.42mm
    Set-up Height - Max Worn - TE = 51.27mm
    - CE = 51.02mm
    - OE = 51.81mm
    - NE = 51.00mm
    Weight (Including D/Plates) Kg 3.2Kg
    Release Bearing
    Complete Assy Intertia (Kgm²) 0.0211Kgm²
    Driven Plate & Hub Inertia (Kgm²) - CP8400 = 0.0059Kgm²
    - CP8600 = 0.0087Kgm²
    - CP5386 = 0.0069Kgm²
    Driven Plate Options

    Driven Plate Thickness
    New = 7.11mm Nom. / Worn = 6.86mm Min.


    Driven Plate Types 

    - Bonded 3 paddle x 3 Outer CP8300 type
    CP8300-A036H - 1"x23 spline
    CP8300-K036H x 1 Middle- 1.00"x23 spline

     

     

     

    - Bonded 4 paddle x 2 Outer
    CP8400-A036H - 1"x23 spline
    CP8400-K036H x 1 Middle- 1.00"x23 spline

     

     

     

    - Bonded 6 paddle x 2 Outer
    CP8600-A036H - 1"x23 spline
    CP8600-K036H x 1 Middle- 1.00"x23 spline


     

     

    - Organic Face x 2 
    CP5386-10 - 1"x23 spline x 2 Outer Plates and CP5386-K036H x 1 Middle Plate

     

    Other splines available see.
    - bonded driven plate chart

    - cerametallic driven plate chart

    N.B. Clutch supplied less driven plate.

    Spare Parts
    Main Pressure Plate CP7972-113
    Intermediate Pressure Plate CP3592-106
    Wear Clips CP7383-101
  • Click on the link to download the relevant drawing.

Associated Products

Contact us today if you need any help finding the right product for you +44 (0) 24 7663 9595